| 时间: 2020-04-17 | 次数: |
一、项目
项目名称 | 项目类别 | 负责人 | 立项年份 |
煤矿瓦斯检测用新型氧化物半导体气敏材料构筑及性能调控 | 国家自然基金重点项目 | 张战营 | 2017 |
千米深井巷道围岩改性关键材料与技术 | 国家重点研发计划项目子课题 | 管学茂 | 2017 |
二维碳化物MXene的气体吸附与转化性能研究 | 国家自然基金面上项目 | 周爱国 | 2017 |
基于聚酰亚胺-共价有机骨架的固相微萃取纤维的制备及性能研究 | 国家自然基金面上项目 | 李忠月 | 2017 |
光激发辅助氧化物半导体材料的瓦斯敏感性能与机理 | 国家自然基金重点项目子课题 | 孟哈日 | 2017 |
协同互补利用大宗固废制备绿色建材关键技术研究与应用/固废高掺烧结与制备 | 国家重点研发计划项目子课题/子课题 | 邹定华 | 2017 |
协同互补利用大宗固废制备绿色建材关键技术研究与应用/固废协同互补制备硫铝系 | 国家重点研发计划项目子课题/子课题 | 朱建平 | 2017 |
活性铝土矿尾矿中铝相的演变及其对水泥水化硬化的作用机理 | NSFC-河南联合基金 | 勾密峰 | 2017 |
有机功能高分子材料 | 河南省高校科技创新人才 | 陈强 | 2017 |
铝土矿尾矿制备轻质保温隔热墙体材料的研究 | 河南省住建厅 | 勾密峰 | 2017 |
胶凝组分颗粒分布对混凝土抗氯离子渗透性的影响及机理 | 河南省自然科学基金 | 朱建平 | 2017 |
新型二维材料的预测、电子性质和生长机理 | 河南省自然科学基金 | 赵瑞奇 | 2017 |
再生混凝土与废旧塑料研制透水混凝土 | 河南省科技攻关 | 张海波 | 2017 |
高镍、铬钢低温激冷介质除鳞技术研究 | 河南省科技攻关 | 许磊 | 2017 |
高导热耐磨聚酰亚胺复合材料应用研究 | 河南省科技攻关 | 王李波 | 2017 |
二硼化钛基超硬多功能材料的高压制备与研究 | 河南省科技攻关 | 胡美华 | 2017 |
二、论文
序号 | 刊物 | |||
1 | A Novel Design of Multi-Mechanoresponsive and Mechanically Strong Hydrogels | Advanced Materials | 陈强 | SCI-1区 |
2 | High strength and self-healable gelatin/polyacrylamide double network hydrogels | Journal of Materials Chemistry B | 陈强 | SCI-1区 |
3 | Porous Aromatic Framework 48/Gel Hybrid Material Coated Solid- Phase Microextraction Fiber for the Determination of the Migration of Styrene from Polystyrene Food Contact Materials | Analytical Chemistry | 李忠月 | SCI-1区 |
4 | Continuously improved gas-sensing performance of SnO2/Zn2SnO4 porous cubes by structure evolution and further NiO decoration | Sensors and Actuators B: Chemical | 孙广 | SCI-1区 |
5 | Room-temperature water-vapor annealing for high-performance planar perovskite solar cells | J. Mater. Chem. A | 王彬彬 | SCI-1区 |
6 | Synthesis of NaV6O15 nanorods via thermal oxidation of sodium-intercalated 2D V2CTx and their electrochemical properties as anode for lithium-ion batteries | Electrochimica Acta | 王李波 | SCI-1区 |
7 | Controlling the orientations of h-BN during growth on transition metals by chemical vapor deposition | Nanoscale SCI 1区 | 赵瑞奇 | SCI-1区 |
8 | The energy dissipation and Mullins effect of tough polymer/graphene oxide hybrid nanocomposite hydrogels | Polymer Chemistry | 陈强 | SCI-2区 |
9 | Facile and large-scale preparation of N doped TiO2 photocatalyst with high visible light photocatalytic activity | Materials Letters | 付乌有 | SCI-2区 |
10 | Sintered bayer red mud based ceramic bricks: microstructure evolution and alkalis immobilization mechanism | Ceramics International | 管学茂 | SCI-2区 |
11 | Effect of sodium hydroxide on the carbonation behavior of β-dicalcium silicate | Construction & Building Materials | 管学茂 | SCI-2区 |
12 | Sintering red mud based imitative ceramic bricks with CO 2, emissions below zero | Materials Letters | 管学茂 | SCI-2区 |
13 | Performance and hydration study of ultra-fine sulfoaluminate cement-based double liquid grouting material | Construction & Building Materials | 管学茂 | SCI-2区 |
14 | Synthesis and characterization of boron and nitrogen co-doped diamond crystals under high pressure and high temperature conditions | CrystEngComm | 胡美华 | SCI-2区 |
15 | Synthesis and improved gas sensing properties of ZnO/a-Fe2O3 microflowers assembled with nanosheets | Materials Letters | 孟哈日 | SCI-2区 |
16 | The electronic and mechanical properties of tetragonal YB2C asexplored by first-principles methods | Journal of Alloys and Compounds | 米国发 | SCI-2区 |
17 | High-pressure synthesis and thermoelectric performance of tellurium doped with bismuth | Journal of Materials Sciences | 宿太超 | SCI-2区 |
18 | Improved formaldehyde-sensing performance of SnO2/Zn2SnO4 nanocomposites by structural evolution | Materials Letters | 孙广 | SCI-2区 |
19 | Phase diagram and physical properties of iridium tetraboride from first principles | PHYSICAL CHEMISTRY CHEMICAL PHYSICS | 王海燕 | SCI-2区 |
20 | MoS2-Decorated Ti3C2 MXene Nanosheet as Anode Material in Lithium-Ion Batteries | Journal of the Electrochemical Society | 王李波 | SCI-2区 |
21 | Flexible and stretchable polyurethane/waterglass grouting material | Construction and Building Materials | 杨政鹏 | SCI-2区 |
22 | Compressive strength development and durability of an environmentalload-reduction material manufactured using circulating fluidized bedash and blast-furnace slag | Construction and Building Materials | 张文艳 | SCI-2区 |
23 | Polyglycerol-based organic-inorganic hybrid adhesive with high early strength | Materials and Design | 杨政鹏 | SCI-2区 |
24 | Preparation of High-Purity V2C MXene and Electrochemical Properties as Li-Ion Batteries | JOURNAL OF THE ELECTROCHEMICAL SOCIETY | 周爱国 | SCI-2区 |
25 | Preparation of Ti3C2 and Ti2C MXenes by fluoride salts etching and methane adsorptive properties | APPLIED SURFACE SCIENCE | 周爱国 | SCI-2区 |
26 | Electrochemical impedance spectroscopy (EIS) of hydration process and drying shrinkage for cement paste with W/C of 0.25 affected by high range water reducer | Construction and Building Materials | 祝瑜 | SCI-2区 |
27 | feasibility of assessing segregation in internally cured mortar based on the variation of properties | Construction and building materials | 邹定华 | SCI-2区 |
28 | Comparative study of phenomenological constitutive equations for an as-rolled M50NiL steel during hot deformation | Journal of Alloys and Compounds | 冀国良 | SCI-2区 |
三、著作
著作名称 | 出版社 | ISBN | 出版年份 | |
破碎围岩注浆加固技术及其工程应用 | 中国矿业大学出版社 | 978-7-5646-3411-7 | 王雨利 | 2017 |
四、专利
序号 | 专利名称 | 负责人 |
1 | 一种真空深过冷快速凝固实验装置 | 崔红保 |
2 | 一种旋转式冲蚀磨损动态电化学测试系统的参比电极保护结构 | 李平 |
3 | 建筑用PVC塑料模板浮选回收再利用工艺 | 曹新鑫 |
